pin hole
英 [pɪn həʊl]
美 [pɪn hoʊl]
针孔，塞孔；气泡；销钉孔
双语例句
- Improvement and Application of Fine Boring Machining of Aluminum Piston Pin Hole of Internal Combustion Engine
内燃机铝活塞精镗销孔加工方式改进及应用 - Research and practice on pin hole of light conversion foil process of aluminum and aluminum alloy
铝及铝合金薄转换箔轧制过程中的针孔 - It was the first eyebar suspension bridge. One such crack formed on the net section at the pin hole, much like an eyebar failure.
形成在销钉孔净截面处的一条裂纹非常象眼杆破坏。 - The Finite Element Analysis of Piston Pin Hole Engines to Improve Structure
发动机活塞销孔结构改进的有限元分析 - A semi elliptic and flaky brachium part with a pin hole is welded on the connecting position between the rod-shaped folding arm and the hanging bar.
细杆状的折叠臂与挂杆连接部位焊有一带销钉孔的半椭圆形、片状肘臂。 - Hexagon bolts with split pin hole on shank& Product grade A and B
GB/T31.1-1988六角头螺杆带孔螺栓A和B级 - The Si-Mn steel track plate and pin usually exist the early abrasion, one of the main reasons is the burr defect of pin hole.
硅锰钢履带板销孔存在脉纹铸造缺陷是造成履带板与履带销出现早期磨损现象的根本原因之一。 - Pin hole bolt ruptures under its service.
销孔螺栓在服役期限内发生断裂。 - There is a pin hole between outside shell and output axis. Port: An external connector that provides input and/ or output connection to or from a computer.
外套与输出轴的径向有一个插销孔。插口：连接电脑的输入和输出的外部接驳器。 - The safety pin can penetrate a safety pin guide pore plate and insert the pin hole of the fixed pore plate of the safety pin.
该安全销可穿过安全销导向孔板插入安全销固定孔板的销孔中； - Failure Analysis on Outside Left Main Pin Hole of Vehicle Front Axle
汽车前轴左主销孔外侧断裂失效分析 - Application of the electrogas welding for the blast furnace jacket There is a pin hole between outside shell and output axis.
气电立焊在高炉炉壳立缝焊接的应用外套与输出轴的径向有一个插销孔。 - Pins with split pin hole
GB/T880-1986带孔销 - Hexagon bolts with split pin hole on shank Reduced shank Product grade B Design and Application on the Air/ oil Separator for Compressor
GB/T31.2-1988六角头螺杆带孔螺栓细杆B级螺杆压缩机油气分离器的设计与应用 - Research and Development of Full Automatic CNC Special Machine for Boring Piston Pin Hole
全自动CNC镗削活塞销孔专机的研究开发 - The results show the mechanism is suitable for noncircular pin hole boring.
结果表明该方法适于异形孔的精密加工。 - To Handle the Fracture of a Large Combined Piston Skirt by Using Special Piston Pin Hole
采用异形活塞销孔解决大型组合活塞裙部裂损问题的探讨 - An Approach to Machining Aligning Pin Hole of Crankcase
加工曲轴箱定位销孔的一种方法 - The control and real-time feedback of boring cutter's radial micro-displacement, is the key on the machining process for non-circular pin hole of piston, and also difficulty.
活塞异形销孔加工过程中，镗刀径向微位移的控制与实时反馈是重点，也是难点。 - Numerical-control processing of a group of high precision cylinder pin hole
一组高精度圆柱销孔的数控加工 - The Technique of Bored Together Pin Hole of Runner and Coupling Bolts to Main Shaft on Platfrom
转轮与主轴联接螺栓销钉孔工地同镗铰实施方法 - Study of Pin Hole Wide-Angle Objective without Distortion
无畸变针孔广角物镜的研究 - The paper analyses the necessity for piston in modern auto to adopt noncircular pin hole.
简述了采用活塞异形销孔的必要性及其结构特点。 - Microscopic analysis to pin hole on machining surface of die-casting hub
压铸轮毂机加工表面针孔的显微分析 - Damage Tolerance Analysis of the Pin Hole in the Engine Turbine Disk
发动机涡轮盘销钉孔损伤容限分析 - Salinized soil affection of dispersibility pin hole test
盐渍土与分散性针孔试验影响 - Using a special pin hole in design will be an effective method to change stress concentration on inside of piston, improve safety coefficient of skirt structure and decrease the fracture of piston skirt.
采用异形销孔设计将是改变活塞内侧应力集中，提高裙部结构的安全系数，减少活塞裙部裂损的有效方法。 - In 3D visual inspection applications, there usually exists a distortion error of the CCD camera's pin hole image of ellipse center.
针对在三维视觉检测应用中，空间椭圆的中心经摄像机针孔成像后存在畸变误差的问题进行了研究。 - A brief introduction of virtual reality technology, followed by a pin hole assembly experiments.
介绍了虚拟现实技术，并进行了销孔装配遥操作实验。